Digital optical fiber link EFL-D



SKU: EFL-D Category:

Description

EMCgear Digital optical fiber link EFL-D is a range of products designed to isolate digital signals between two locations, especially in EMC test laboratories and DUT monitoring or stimulation systems.

Two or four digital channels with a sample rate of 5 MSa/s per channel transfer sampled logic states between the Input and Output units. Input and output logic levels of 2.5 V, 3.3 V and 5 V are selected according to the required variant, supporting integration with different logic interfaces.

FPGA-based communication with real-time CRC-5 validation protects every transmitted data frame. The receiver monitors link validity and controls the digital outputs. Short-circuit protection is provided on the outputs.

Aluminum housings and filtered electrical interfaces support use in EMC test environments. The optical fiber connection separates the Input and Output units without an electrical signal connection, while battery operation provides a typical operating time of 20 hours.

Product datasheet

EFL-D_Datasheet_Manual_v1.0.pdf

Pricing / lead-time

For the current price list and lead-time information, please send your request using the Request Quote button or the contact form on our website. We will get back to you within 24 hours.

Features

Battery operated digital link with 2.5 V, 3.3 V or 5 V input / output logic levels
2 or 4 digital channels per link
Sample rate of 5 MSa/s per channel
FPGA-based communication with CRC-5 protection on every data frame
Short-circuit protected digital outputs
Designed for EMC test labs with optical signal isolation
Typical operating time of 20 hours
820 nm SMA-905 optical interface

Technical parameters – General

Channels *) 2 or 4
Signal type Digital logic
Input logic levels *) 2.5 V / 3.3 V / 5 V
Output logic levels *) 2.5 V / 3.3 V / 5 V
Sample rate 5 MSa/s per channel (2-channel and 4-channel versions)
Input impedance 100 kOhm
Input capacitance 27 pF
Input filter cutoff frequency 10.6 MHz
Output impedance 100 Ohm
Output current / overload limit ±25 mA
Output short-circuit protection Yes
Data integrity protection CRC-5 on every data frame
Optical interface 2 × SMA-905, 820 nm
Recommended optical fiber length 0 to 900 m
Battery 4.2 V / 5000 mAh, 1-cell LiPo
Operating time Typ. 20 hours
Operating temperature 0 to 55 °C

*) Variant dependent. Please specify the required number of channels and input / output logic levels in your request for quotation.

The input filter cutoff frequency is not the guaranteed maximum digital toggle frequency. Minimum pulse width, propagation delay, jitter and input thresholds are not yet specified in the v1.0 manual.

Scope of delivery (per EFL-D link kit)

EFL-D Digital fiber link – Input side box 1 pc
EFL-D Digital fiber link – Output side box 1 pc
Foam lined transport box (330 × 272 × 82 mm) 1 pc

Recommended accessories

Power adaptor 100–240 V to 5 V, 3 A, 2.1 mm screw lock, UK/EU/US/AU plug EFL-A-AD1
(2 pcs are recommended)
Fiber patch cable SMA905-SMA905, 10 m
Duplex fiber
Termination: 2 × SMA905 on both ends
Optical mode: OM1
Core / cladding: 62.5/125 µm
Length: 10 m
EFL-A-FPC10
Fiber patch cable SMA905-SMA905, 20 m
Duplex fiber
Termination: 2 × SMA905 on both ends
Optical mode: OM1
Core / cladding: 62.5/125 µm
Length: 20 m
EFL-A-FPC20

*) Please mark the required accessories in your request for quotation.

Downloads

Product datasheet

EFL-D_Datasheet_Manual_v1.0.pdf